The Clearly Solar system consists of 4 key components:

• Flurosorb flat plate collector
• Flurocyl twin coil cylinder
• Fluropro solar controller
• Solar pump station

Flurosorb Flat Plate collector

The Flurosorb Flat Plate gives you high efficiencies from a large absorber area of 2.02m², robust construction from toughened glass and ultrasonic welding, whilst the slimline frame gives a total footprint of just 2.24m². The neat design subtly fits in with the roof with low protrusion making it well within the threshold normally required for planning permission and at 43kg it is one of the lightest flat plates on the market.

  Construction:
•Brushed aluminum frame
•Grid absorber made of copper
•Solar glass thickness 4mm (tough and resistant to vandalism)
•Absorber ultrasonically welded and not soldered, suitable for
    high temperature
•High selective absorber coating

  Dimensions:
•Dimensions 1.16x1.93m
•Gross collector area 2.24m²
•Absorber surface areas 2.02m²
•Low flat plate weight only 43kg
•Total depth 110mm achieving low protrusion

  Performance:
•Leading performance flat plate collector
•Collector efficiency η 81.8%
•Light transmission 91%
•Solar radiation absorption 95%
•Solar radiation emission 5%
•Shutdown temperature 196ºC
•60mm insulation for improved efficiency
•10 year warranty

  Fixing:
•Horizontal and vertical orientation possible
•Mounting accessories for pitched roofs (On-roof and in-roof)
•A-frame for flat roofs

Flurocyl twin coil cylinder

Unvented, stainless steel and narrow enough to fit through any standard airing cupboard door, the Flurocyl twin coil cylinder ensures that every last bit of the suns energy is used and a high volume of domestic hot water is provided all year round.

•Twin coil Flurocyl cylinder fully compatible with all open vent and
    sealed systems, including the full range of Glow-worm boilers
•Available in 200, 250 and 300 litres
•High grade stainless steel cylinder with laser welded seams
•Insulation meets CHeSS best practice (loss as low as 1.9kWh)
•25 year warrantee in cylinder shell
•554mm width for flexible siting
•3kW immersion heater as standard
•3 thermal cut outs (boiler, immersion and solar)
•Supplied with a carrying handle for easy of transportation

The Fluropro controller is the real brains of the operation, simple to use with a boiler domestic hot water programmer and solar gain display to show how much energy has been collected from the sun since the system began operating. Intelligent functionality holds off the boiler whenever there is solar gain to be had making fossil fuel usage as low as possible.

•Differential temperature control
•East / West system control (additional collector sensor and pump
    station connection)
•Solar gain display
•Temperature sensors
•Three channels (solar, boiler, auxiliary heating)
•Programmable boiler & auxilary channels
•Easy wiring connections
•Solar gain modulation
•Boiler heating delay function (similar to optimum start)

The Solar Pump Station pumps the solar fluid from the flat plate to the cylinder and back again. Its compact design fits easily on the wall in the house or loft. The Three speed pump enables you to match the flow rate of the system to a wide range of properties.

•6m head pump
•Integrated flow meter
•Two isolation valves
•Two non-return valves
•Two temperature gauges
•Pressure gauge
•Pressure relief valve
•Expansion vessel connection
•Integrated slow adjuster and meter